CWB
CHILLERS
from 140 to 570 kW
The CWB range consists on air cooled water chillers with axial fans for outdoor installation...
Share
The CWB range consists on air cooled water chillers with axial fans for outdoor installation. The CWB family comprises 12 basic models with cooling capacities ranging from 140 to 570kW allowing flexibility of the unit configuration and of the related accessories according to the opearting conditions of the final installation. CWB units are particularly suitable for installations where continuous chilled water production is required even for applications in low external ambient temperatures..
All standardunits are equipped with:
- Copper brazed stainless steel plates heat exchanger
- Water differential pressure switch
- Scroll type compressors
- Aluminum microchannel condensers
- Electronic expansion valve
- Axial fans
- Microprocessor controller
- Water strainer
- RS485 port
The structure is made up of a galvanized steel frame with polyester powder coating,
making the CWB suitable for outdoor installation and for protection in harsh environments.
EASY MAINTENANCE
The compressor cabinet is separate from the fan’s section and is accessible on three sides to make control and maintenance easy. The hydraulic section is also easily accessible.
Data referred to: water temp. in/out: 12/7°C – ambient air temp. 35°C
SEPR HT Data are in accordance with European Regulation (EU) 2016/2281 for eco-design requirements.
The complete technical data can be found in the product brochure.
- P2/P3 Single or double pump
- Non-ferrous water circuit;
- Pressurized water tank
- Non ferrous pressurized water circuit (stainless steel water tank)
- Condenser anti-corrosion treatment Electrofin®
- Shut-off valves
- Anti-freeze heater
- Electrical switchboard anti-condensation heater
- Continuous fans speed control – electronic fans (minimum ambient temperature -10.0°C)
- Low ambient temperature kit (minimum ambient temperature -20°C)
- Full or partial heat recovery
- Compressors soft starters
- Electronic controller sun/rain protection
- Compressor(s) acoustic shield(s)
- Wind baffles kit
- Condensers air filters
- Flanged or threaded water connections kit
- Control panel roof kit
- Rubber anti-vibration mountings kit
- Automatic water filling kit
- Remote Panel kit
- Gateway for remote communication
Main features
The CWB range consists on air cooled water chillers with axial fans for outdoor installation. The CWB family comprises 12 basic models with cooling capacities ranging from 140 to 570kW allowing flexibility of the unit configuration and of the related accessories according to the opearting conditions of the final installation. CWB units are particularly suitable for installations where continuous chilled water production is required even for applications in low external ambient temperatures..
All standardunits are equipped with:
- Copper brazed stainless steel plates heat exchanger
- Water differential pressure switch
- Scroll type compressors
- Aluminum microchannel condensers
- Electronic expansion valve
- Axial fans
- Microprocessor controller
- Water strainer
- RS485 port
The structure is made up of a galvanized steel frame with polyester powder coating,
making the CWB suitable for outdoor installation and for protection in harsh environments.
EASY MAINTENANCE
The compressor cabinet is separate from the fan’s section and is accessible on three sides to make control and maintenance easy. The hydraulic section is also easily accessible.
Cooling Capacity & Energy Efficiency
Data referred to: water temp. in/out: 12/7°C – ambient air temp. 35°C
SEPR HT Data are in accordance with European Regulation (EU) 2016/2281 for eco-design requirements.
The complete technical data can be found in the product brochure.
Kit and options
- P2/P3 Single or double pump
- Non-ferrous water circuit;
- Pressurized water tank
- Non ferrous pressurized water circuit (stainless steel water tank)
- Condenser anti-corrosion treatment Electrofin®
- Shut-off valves
- Anti-freeze heater
- Electrical switchboard anti-condensation heater
- Continuous fans speed control – electronic fans (minimum ambient temperature -10.0°C)
- Low ambient temperature kit (minimum ambient temperature -20°C)
- Full or partial heat recovery
- Compressors soft starters
- Electronic controller sun/rain protection
- Compressor(s) acoustic shield(s)
- Wind baffles kit
- Condensers air filters
- Flanged or threaded water connections kit
- Control panel roof kit
- Rubber anti-vibration mountings kit
- Automatic water filling kit
- Remote Panel kit
- Gateway for remote communication