IT

pcd

Industry 4.0 Ready
Made in Italy

Low Outlet Temperature Refrigeration Dryers

Flow rate: 12 ÷ 720 m3/h

PCD (Process Chiller-Dryer) refrigeration dryers, called “Point of Use Dryers”, are used in situations where a compressed air temperature...

Main features

PCD refrigeration dryers (Process Chiller-Dryer), called “Point of UseDryerare used in situations where a compressed air temperature equal to the Dew-Point value is required (Dew -Pointsuch as the moulding sector of plastics and foodstuffs, and sectors where it is not possible to use water for cooling.

In addition to the electronic controller (Industry 4.0 ready), the range features a single air-to-cooler (or evaporator) heat exchange circuit. The incoming warm and humid air exchanges heat with the refrigerant fluid counter-current flow, undergoing an abrupt temperature drop. Before leaving the dryer, the cold air is conveyed into the stainless-steel demister separator where the condensate is collected and discharged from the system. The treated air exits at a temperature close to thedew point. 

MAXIMUM WORKING CONDITIONS
   Ambient temperature: + 50°C
   Inlet air pressure: 15 barg
   Inlet air temperature: + 55°C

ModelAir flowPower SupplyConnections
 [m3/h][l/min][scfm][Ph/Volt/Fr][ Ø ]
PCD 2C1220071/230/50-60G 3/8” BSP-F
PCD 6C36600211/230/50-60G 3/8” BSP-F
PCD 10601 000351/230/50G 3/4” BSP-F
PCD 15901 500531/230/50G 3/4” BSP-F
PCD 201161 930681/230/50G 3/4” BSP-F
PCD 251502 500881/230/50G 1” BSP-F
PCD 402404 0001411/230/50G 1” BSP-F
PCD 603606 0002121/230/50G 1.1/2” BSP-F
PCD 804808 0002833/400/50G 2” BSP-F
PCD 10060010 0003533/400/50G 2” BSP-F
PCD 12072012 0004243/400/50G 2” BSP-F

 

Data refer to the following nominal condition: ambient temperature + 25 °C; inlet air pressure 7 barg; inlet air temperature +35 °C; outlet air temperature +5 °C.

OPTIONS AND ACCESSORIES

DMC34

Electronic controller

TAC

Anti corrosion treatment

BK

Zero loss drain

WC

Water Cooling with plates condenser

WC

Water cooling. Tube bundle condenser

SERVICE UNIT

8.000 hours maintenance kit for BK type electronic drain


    Scroll the accessories
    ico_form

    REQUEST INFORMATION

    Fill out the form with your data to contact us,
    we will reply as soon as possible.

      Are you a robot? Input this code: captcha

      I have read and accept the Privacy Policy.

      Icona personalizzata

      Aggiungi qui il testo dell'intestazione

      Invia la tua candidatura